CONTINENTAL EDISON CELED43S04B3 Manual De Instrucciones página 50

• The Wireless LAN adaptor supports 802.11 a,b,g & n
type modems. It is highly recommended that you should
use the IEEE 802.11n communication protocol in order
to avoid any possible problems while watching videos.
• Use the other USB input, if you experience problems
with audio/video performance.
• You must change your modem's SSID when there are
any other modems around with the same SSID. You
can encounter connection problems otherwise. Use
a wired connection if you experience problems with a
wireless connection.
Configuring Wireless Device Settings
To enable Wi-Fi features, plug in the Wi-Fi dongle to one
of the USB ports. Open the Network/Internet Settings
menu and select Network Type as Wireless Device to
start connection process.
The TV will scan the wireless networks automatically. A
list of available networks will be displayed. Please select
your desired network from the list.
Note: If the modem supports N mode, you should set N mode
settings.
If the selected network is protected with a password,
please enter the correct key by using the virtual keyboard.
You can use this keyboard via the directional buttons and
the OK button on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now established. To
disconnect from a wireless network, highlight Network
Type and press Left or Right buttons to set as Disabled.
Highlight Internet Speed Test and press the OK button
to check your internet connection speed. Highlight
Advanced Settings and press the OK button to open
the advanced setting menu. Use directional and numeric
buttons to set. Press the OK button to save settings
when complete.
Other Information
The status of the connection will be displayed as
Connected or Not Connected and the current IP
address, if a connection is established.
Connecting to your mobile device via WiFi
• If your mobile device has WiFi feature, you can connect
it to your TV via a router, in order to access the content
in your device. For this, your mobile device must have
an appropriate sharing software.
• Connect to your router following the steps stated above
in the Wireless Connectivity section.
• Afterwards, engage your mobile device with the router
and then activate the sharing software on your mobile
device. Then, select files that you want to share with
your TV.
• If the connection is established correctly, you will be able
to access the shared files from your mobile device via
the Media Browser of your TV.
• Enter the Media Browser menu and the playback
device selection OSD will be displayed. Select your
mobile device and press the OK button to continue.
• If available, you can download a virtual remote controller
application from the server of your mobile device
application provider.
Note: This feature may not be supported on all mobile
devices.
Wake ON
Wake-on-LAN (WoL) is a standard that allows a device
to be turned on or woken up by a network message. The
message is sent to the device by a program executed on a
remote device connected to the same local area network,
such as a smartphone.
Your TV is WoL compatible. To enable this feature set the
Wake On option in the Network/Internet Settings menu
as On. It is necessary that both the device, from which
the network message will be sent to the TV, and the TV
are connected to the same network. Wake On feature is
only supported for Android OS devices and can only be
used via YouTube and Netflix applications.
In order to use this feature the TV and the remote device
should be connected at least once while the TV is on. If the
TV is powered off, the connection should be reestablished,
the next time it is switched on. Otherwise this feature
will be unavailable. This does not apply, when the TV is
switched into the standby mode.
The performance of some devices in the market, may vary
due to the software architecture. In order to use Wake On
feature with a better performance, please make sure that
your device has latest firmware version.
Connectivity Troubleshooting
Wireless Network Not Available
• Ensure that any firewalls of your network allow the TV
wireless connection.
• Try searching for wireless networks again, using the
Network/Internet Settings menu screen.
If the wireless network does not function properly, try
using the wired network in your home. Refer to the Wired
Connectivity section for more information on the process.
If the TV does not function using the wired connection,
check the modem (router). If the router does not have a
problem, check the internet connection of your modem.
Connection is Slow
See the instruction book of your wireless modem to get
information on the internal service area, connection speed,
signal quality and other settings. You need to have a high
speed connection for your modem.
English - 48 -