Publicidad
Idiomas disponibles
Idiomas disponibles
1. Lower exhaust by removing the (2) 8mm bolts from the hanger bracket
on both sides of the vehicle.
3. Fishwire the 7/16" carriage bolts and spacers through the enlarged access
hole and out the two side mounting holes in the frame rail, leave fishwires
attached. See Figure 2.
©2015 Cequent™ Performance Products, Inc. - Printed in Mexico
2. Enlarge the access hole with a die grinder to allow 7/16" carriage bolts and
spacers access to both sides of vehicle frame rail.
4. Raise side brackets over fishwires, remove fishwires and install conical
washers and nuts on both sides. Hand tight only at this time.
Sheet 4 of 15
75943NP
03-26-15
Rev. B
Publicidad
