In Case Of A Power Failure; Surface Burners - GE JGBS10 Manual Del Propietário

In Case of a Power Failure

In the event of a power failure, the oven is inoperable and no attempt should be made to operate it. However, the
burner cap, then slowly turn the knob to the LITE position. Once lit, surface burners will continue to operate normally.

Surface Burners

Lighting a Surface Burner
WARNING
Burners should be operated only
when covered by cookware. Burner flames not
covered by cookware present a risk of fire or
clothing ignition. Never let flames extend beyond the
sides of the cookware. Failure to comply may result
in serious injury.
Make sure all burners are in their correct locations and
fully assembled before attempting to operate any burner.
in and turn it to the LITE position.
Selecting a Flame Size
Watch the flame, not the knob, as you adjust heat. When
rapid heating is desired, the flame size should match the
size of the cookware you are using. Flames larger than
the bottom of the cookware will not heat faster and may
be hazardous.
Using the Surface Burners
NOTES:
time without cookware on the grate. The finish on the
grate may discolor or chip without cookware to absorb
the heat.
burner is on. Damage to the product may occur.
place your hand, a pot holder or cleaning materials
on them.
8
spark igniting the burner. When one burner is turned to
LITE, all burners will spark. Sparking will continue as
long as the knob remains at LITE. Once gas is ignited,
turn the knob to adjust the flame size.
These flames are too large for the pot
Your rangetop offers convenience, cleanability and
flexibility for a wide range of cooking applications.
The smallest burner is the simmer burner. A simmer
burner turned down to LO provides precise cooking
performance for foods such as delicate sauces that
require low heat for a long cooking time.
49-85209-7