Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
To change heads, press the release button
(6).
A How to epilate
1 Turning on
•
Press one of the lock keys and turn the
switch clockwise to setting 2 (optimum
setting). For reduced speed, choose
setting 1 (soft setting).
•
The «smartlight» comes on instantly
and shines as long as the appliance is
switched on. It reproduces an almost
daylight condition, thus revealing even
the finest hair and giving you a better
control for improved epilation efficiency.
2 How to guide the appliance
•
Always stretch your skin when epilating.
•
Always make sure that the epilation area
between the massaging rollers is in
contact with your skin.
•
The pivoting caps automatically adapt to
the contour of your skin.
•
Guide the appliance in a slow, continu-
ous movement without pressure against
the hair growth, in the direction of the
switch. As hair can grow in different
directions, it may also be helpful to
guide the appliance in different direc-
tions to achieve optimum results. The
pulsating movement of the massaging
rollers stimulate and relax the skin for a
gentler epilation.
•
If you are used to the sensation of
epilation and prefer a faster way of
removing hair, attach the Efficiency cap
(1b) replacing the massage system (1a).
3 Leg epilation
Epilate your legs from the lower leg in an
upward direction. When epilating behind
the knee, keep the leg stretched out
straight.
10
4 Underarm and bikini line epilation
Please be aware that especially at the
beginning, these areas are particularly
sensitive to pain. With repeated usage the
pain sensation will diminish. For more
comfort, ensure that the hair is at the
optimum length of 2-5 mm.
Before epilating, thoroughly clean the
respective area to remove residues (like
deodorant). Then carefully dab dry with a
towel. When epilating the underarm, keep
your arm raised up so that the skin is
stretched and guide the appliance in
different directions. As skin may be more
sensitive directly after epilation, avoid
using irritating substances such as deo-
dorants with alcohol.
Overheating protection
As a safety feature to avoid the unlikely event
of the appliance overheating, it may switch
off automatically and the charging lights flash
(red/green). In this case, turn the switch back
to the position «0» and let the appliance cool
down.
Cleaning the epilation head
Before cleaning, unplug the appliance.
Regular cleaning ensures better performance.
Brush cleaning:
5 Remove the cap and brush it out.
6 Thoroughly clean the tweezers from the
rear side of the epilator head with the
brush dipped into alcohol. While doing so,
turn the tweezer element manually. This
cleaning method ensures best hygienic
conditions for the epilation head.
Cleaning under running water:
7 Remove the cap. Hold the appliance with
the epilation head under running water.
Then press the release button (6) to
remove the epilation head.
Thoroughly shake both, the epilation
head and the appliance to make sure that
Publicidad
Tabla de contenido
