us_main.book.book Page 9 Tuesday, November 17, 2020 10:53 AM
INSTALLATION
Before Installing
WARNING
• Moving or installation of the appliance requires two or more people. Failure to follow these instructions
may result in injury.
• Store and install the appliance where it will not be exposed to temperatures below freezing or exposed
to outdoor weather conditions. Failure to follow this warning can cause product or part failure, serious
injury, fire, electric shock, or death.
• Properly ground the washer to conform with all governing codes and ordinances. Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
• To reduce the risk of electric shock, do not install the appliance in humid spaces. Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
• To ensure proper airflow, do not block the large opening on the bottom of the washer with carpeting or
other materials.
• Do not remove the ground prong from the power cord. Do not use an adapter or extension cord. Plug
into a grounded 3-prong outlet. Failure to follow this warning can cause serious injury, fire, electric
shock, or death.
• Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service personnel - Do not contact the following parts while the appliance is energized: pump,
motor, noise filter cover, and heater (on applicable models).
Installation Overview
Please read the following installation instructions first after purchasing this washer or transporting it to
another location.
a
e
Choosing the Proper Location
a
Unpacking and Removing Shipping Material
b
Connecting the Water Inlet Hoses
c
Connecting the Drain Hose
d
Leveling the Washer
e
b
f
INSTALLATION
c
d
9