D+H LAH 65-K-BSY+ Manual Del Usuario página 6

Intended use
- Louvre drive for infinitely electric opening and
®
closing of Hahn louvre windows of type S9, S9-45°,
S9iV, S9iVt-05, S9iVt-05 All-glass and Tairmo
- The louvre must be prepared by the louvre
manufacturer for the application of the drive
- Operating voltage 230 V AC
- Usable for smoke extraction as well as daily
ventilation
- Only for inside mounting
Safety notes
Operating voltage 230 V AC!
Risk of injury from electric shock!
Do not reverse L+N! Connect PE!
Before mounting / demounting completely
disconnected and volt-free!
- Connection has to be carried out only by an
authorized electrical specialist
- Danger of violent pressure in handaccessible area
- Keep away People from the operating area of the
drive
- Keep away children from the control
- Use only in dry rooms
- Only for inside mounting.
Use rain detector with danger of rain
- Just use unchanged original D+H parts
Observe enclosed r ed safety slip!
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following directives:
2014/30/EU, 2014/35/EU
Technical file at:
D+H Mechatronic AG, D-22949 Ammersbek
Thomas Kern
Member of the Board
26.03.2015
6/20
LAH 65-K-BSY+
Maik Schmees
Authorized signatory, Technical Director
Performance Features
- Microprocessor controlled synchro electronics for
a precise synchronous run of up to 4 drives
- Individually programmable (via SCS software)
- Protection system for the main closing edge
Functional description
A synchron-group (LAH 65-K-BSY+) can be count up
to 4 drives, which communicate by a bus. Each drive
has it's own adress. This adress is configurable with
SCS software.
The last drive of a synchron-group is the master,
which controls the other drives, the slaves. Different
forces between the drives of a group will balanced
with intelligent force- and position control. In case of
malfunction respective cutoff of a drive, all drives will
shut down from the master-drive.
Disposal
Electrical devices, accessories and packaging
should be sorted for environmental-friendly recycling.
Do not dispose electrical devices into household
waste!
Only for EC countries:
According the European Guideline 2012/19/EU for
waste electrical and electronic equipment and its
implementation into national right,
electrcal devices that are no longer
usable must be collected separately
and disposed of in an environmentally
correct manner.
English 99.826.57 1.0/07/15