Getting To Know Your Appliance; Control Panel; Controls; Display - Bosch BFL634G.1 Instrucciones De Uso

Getting to know your appliance

en
*Getting to know your
appliance
I n this section, we will explain the indicators and
G e t t i n g t o k n o w y o u r a p p l i a n c e
controls. You will also find out about the various
functions of your appliance.
Depending on the appliance model, individual
Note:
details and colours may differ.
Buttons
(
The buttons on the left- and right-hand side of the
control panel have a pressure point. Press these
buttons to activate them.
For appliances that do not have a stainless steel
front, these two button touch fields do not have a
pressure point.
Touch fields
0
There are sensors under the touch fields. Simply
touch the respective symbol to select the function.
Rotary selector
8
The rotary selector is fitted so that you can turn it
indefinitely to the left or right. Press it lightly and
move it in the direction required using your finger.
@

Display

You can see the current adjustment values,
options or notes in the display.

Controls

The individual controls are adapted for the various
functions of your appliance. You can set your appliance
simply and directly.
Buttons and touch fields
Here you can find a short explanation of the various
buttons and touch fields.
Symbol
Buttons
on/off
ÿ
start/stop
l
Touch fields
90 Microwave output
8
Meaning
Switching the appliance on and
off
Starting or stopping an operation
Selects 90 watts

Control panel

In the control panel, you can use the various buttons,
touch fields and the rotary selector to set the required
function of the appliance. The current settings are
shown in the display.
The overview shows the control panel when the
appliance is switched on with a selected operating
mode.
180 Microwave output
360 Microwave output
600 Microwave output
900 Microwave output
Time-setting options
s
Programmes
%
Weight
a
Information
°
Automatic door opening Opens the appliance door
v
--------
The touch field, which has a value on the display that
can be changed or displayed in the foreground, lights
up red.
Rotary selector
You use the rotary selector to change the adjustment
values shown in the display.
In most selection lists, e.g. programmes, the first
selection follows the last.
In some selection lists, e.g. duration, you have to turn
the rotary selector back the other way when you reach
the minimum or maximum value.
Display
The display is structured so that the information can be
read at a glance in any situation.
The value that you can currently set is in focus. It is
displayed in white lettering and underlined. The value in
the background is displayed in grey.
Selects 180 watts
Selects 360 watts
Selects 600 watts
Selects 900 watts
Select time-setting options
Selects a programme
Selects the weight in the pro-
gramme
Display notes
Hold down (approx. 3 secs) to call
up the basic settings