Electrolux EWF 1086 GDW Manual De Instrucciones página 14

14 www.electrolux.com
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
– Do not set the prewash phase.
– Do not set the delay start.
9.3 Activating the appliance
Press the On/Off button to activate or de-
activate the appliance. A tune sounds
when the appliance is activated.
9.4 Setting a programme
1.
Turn the programme knob and set
the programme:
– The related programme indicator
comes on.
– The indicator of the
– The display shows the level of the
Time Manager, the programme du-
ration and the indicators of the pro-
gramme phases
2. If necessary, change the temperature,
the spin speed, the cycle duration, or
add available options. When you acti-
vate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message Err.
9.5 Starting a programme
without delay start
Press
• The indicator
stays on.
• The indicator
display.
• The programme starts, the door is
locked and the display shows the indi-
cator
• The drain pump can operate for a short
time when the appliance fills water.
:
stops to flash and
starts to flash on the
.
9.6 Starting a programme with
delay start
• Press
flashes.
play shows the delay you want to set.
The related indicator comes on the dis-
play.
• Press
– The appliance starts the countdown.
– When the countdown is completed,
To cancel the delay start:
1.
2.
9.7 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
2.
3.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts automati-
cally the programme duration
agree with the laundry load.
• The display shows the new val-
ue.
again and again until the dis-
:
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
.
Press to set the appliance to
pause.
Press until the display shows
Press again to start the pro-
gramme immediately.
Press . The indicator flashes.
Change the options.
Press again. The programme con-
tinues.
'.