GE Profile GSMF2LEB Manual De Uso Y Cuidado página 49

About CustomCool™
ExpressThaw™
ExpressChill™
(On some models)
How it Works
The CustomCool™ feature is a system of dampers,
a fan, a temperature thermistor and heater.
Depending on the function selected, a combination
of these will be used to quickly chill items, thaw
items or hold the pan at a specific temperature.
The pan is tightly sealed to prevent the temperature
into these pan cause temperature fluctuations in
the rest of the refrigerator.
How it Works
Enpty the pan. place the Chill / Thaw tray in
the pan. Place the items on the tray and
close the pan completely.
LCD Models:
Access By: Home > Options > Refrigerator
Options > CustomCool Pan
Non-LCD Models:
Select the Express Thaw™, ExpressChill™
or SelectTemp™ pad. The display and SET
light will come on. Tap the pad until the light
appears next to the desired setting. Use the
following chart to determine the best setting
to use.
To stop a feature before it is finished:
LCD Models: Go into that feature's menu
and press the OFF button.
Non-LCD Models: Tap the feature's pad
until no options are selected and the dispalay
play is off.
How to remove and Replace the Drawer
To remove:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are in the
unlock position.
Place the sides of the drawer into the
into the drawer supports, making sure
the swing locks fit on the drawer slots.
Lock all four swing locks by rotating them
to the lock position.
Some CustomCool™ models feature a beverage
center. It is designed to store beverages at colder
temperatures. Select the Beverage Center pad if
you like to keep extra-chilled refreshments on
hand.
The controls for this pan are located at the top of
the refrigerator with the temperature controls.
During Express Thaw™, ExpressChill™, the
display on the control will count down the time
in the cycle.
After the Express Thaw™ cycle is complete,
the pan will reset to the MEAT setting 0ºC
(32ºF) to help preserve thawed items until they
are used.
The displayed actual temperature of the
CustomCool™ pan may vary slightly from the
SET temperature based on usage and
operating enviroment.
NOTE: For food safety reasons, it is recomended
that foods be wrapped in plastic wrap when
using ExpressThaw™. This will help contain
meat juices and improve thawing performance.
47