Declaration Of Conformity - Eaton xComfort Room-Manager Instrucciones De Montaje

We, EATON Industries (Austria) GmbH
declare under our sole responsibility that the product (family)
Eaton - Room-Manager,
CRMA-...
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and "good engineering practices"
complies with the provisions of Council directive(s):
based on compliance with following standard(s):
EU- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark: 2006
Doc.Id.: CRMA-...291117
CTAA-01/01
CTAA-02/01
CBEU-02/01
CSAU-01/01
CBEU-02/02
CJAU-01/01
CDAU-01/01
CRCA-00/01
CHSZ-00/01

Declaration of Conformity

3943 Schrems, Eugenia 1
Austria
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 50491-5-1:2010,
EN 50491-5-2:2010, EN 62479:2010, EN 61010-1:2010, EN 50581:2012
Fernando Ceccarelli
Senior Vice President
General Manager
7
29.11.2017
Friedrich Schröder
Director Quality
& Systems
RF- SYSTEM
BASIC - MODE - CARD