Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Palmgren Operating Manual & Parts List
DESCRIPTION
Palmgren 3" , 6" and 8" Cross Vises travel on
two separate axes, longitudinal and cross ,
to permit accurate positioning of work-
piece. Body, saddle, base and jaws are made
of high strength cast iron. Vise leadscrew,
longitudinal and cross feed screws are pre-
cision ground carbon steel.
SAFETY RULES
• Understand and obey all safety instruc-
tions supplied with drill press, mill, or
other machines on which vise is used.
Stock No.
Jaw Width
Throat Depth
Jaw Opening
Overall Height
Base Length
Base Width
Longitudinal Travel
Cross Travel
Value of One Division
Cross Travel per One Revolution
Longitudinal Travel per One Revolution
A
L
Figure 1 - Dimensions
A
B
C
H
L
W
W
9630303C, 9630601C, 9630801C
• Bolt or clamp vise to work surface in at
least two mounting locations using
mounting flanges provided on base.
• Be sure workpiece is clamped securely
between jaws before starting machin-
ing operation.
• Do not over tighten—vise can develop
a large clamping force. Use only force
which is needed.
• Do not pound or hammer on work-
piece. This vise is designed to clamp
the workpiece in a desired position for
machining operations only.
DIMENSIONS
Refer to Figure 1.
9630303C
9630601C
3"
6"
1
1
/
"
2"
8
3"
6"
5
5
/
"
7
8
8
1
/
"
12
4
4
1
/
"
7
2
5"
8"
5"
8"
0.002"
0.001"
0.100"
0.100"
0.100"
0.100"
2
9630801C
8"
2"
8"
1
/
"
7
1
/
4
4
1
/
"
12
1
4
1
/
"
7
1
/
2
2
8"
8"
0.001"
0.100"
0.100"
C
B
"
/
"
4
"
H
Publicidad
Tabla de contenido
