Starting Up; Instructions For Use; Turning On; Cleaning And Maintenance - Lotus CWKT-64ET Guia Para La Intalación E Instrucciones De Uso

GB IE
Attention! The manufacturer will neither be held responsible for, nor will give any compensation during the guarantee
period for any damage caused, and which is due to inadequate installations not compliant with the instructions.

STARTING UP

Before using the appliance for the first cooking, it is necessary to clean it carefully, especially the grill (see paragraph
"cleaning and care").
Check the connection of the appliance and start it up following the instructions.
IMPORTANT:
Thermic shocks can damage and DISTORT PERMANENTLY the heating element. You need to defreeze the
product before cooking it!
DO NOT USE ABRASIVE OR CORROSIVE DETERGENTS. DO NOT CAUSE THERMIC SHOCKS TO
THE HEATING ELEMENT DURING THE CLEANING PROCESS. DO NOT USE ICE TO CLEAN THE
HEATING ELEMENT.

INSTRUCTIONS FOR USE

Attention: Use the appliance only under surveillance.
- The drip pan may only be opened when the appliance is cold.
The grill scan be used to cook meat, würstel, sausages, fish, vegetables, etc.

TURNING ON

Switch on the main switch installed above the appliance. Turn the control knob corresponding to the element from
position "0" to the degree of heating desired, between 1 and 6. The light comes on, as son as the power supply is on.
The green light indicates the presence of electrical tension. To turn off the appliance, turn the knob back into position
"0".

CLEANING AND MAINTENANCE

Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with
high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a dry
cloth. Do not use abrasive or corrosive detergents. All residues of food must be removed from the grill with the proper
spatula.
An advice to optimize the cleaning, in addition to the scraper supplied with the appliance for the major residuals, is to
consider that the position 6 of the energy regulator is not a cooking position and should only be used for pyrolytic
cleaning.
In this position the temperature of the resistance, equal to 500 °C, allows to carbonize all the dirt and cooking residues.
The carbonized residues can be removed with a simple paper towel.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT GOING TO BE USED FOR
SOME TIME
Clean and dry the appliance carefully according to the instructions. Disconnect the power supply.

PROCEDURE TO FOLLOW IN THE EVENT OF A BREAKDOWN

In the event of breakdown, turn off the appliance, disconnect the power supply by using the device situated above the
appliance and notify the after sales service.

MAINTENANCE (ONLY FOR QUALIFIED PERSONNEL)

Any kind of maintenance must only be done by qualified personnel. Before carrying out maintenance, remove the plug
or switch off the switch above the appliance.
20