Robot Coupe Mini MP 160 V.V. Manual De Instruccion página 9

Removing the blade
- Unplug the power mixer then, hold the blades with
the provided blade-locking tool.
- Using the blade-locking tool, unscrew the drive
coupling then remove the blade for easy cleaning.
B
LADES WITH WATERTIGHT SEALS
B
ELL
R
EMOVAL
DIRECTION
B
LADE REMOVAL
Mini MP 190 V.V.
Mini MP 190 Combi
Mini MP 240 V.V.
Mini MP 240 Combi
B
LADE LOCKING
F
B
LADE REMOVAL
8
Installing the emulsifying disc
- In order to install it safely, introduce the disc into
the bell, then hold it in place using the locking tool.
- Next, turn the drive coupling with this tool until it
starts to tighten.
Removing the emulsifying disc
- The disc can be removed in exactly the same way
as the blades.
B
LADE LOCKING
D
RIVE COUPLING
Mini MP 190 V.V.
Mini MP 190 Combi
Mini MP 240 V.V.
Mini MP 240 Combi
B
LADE
OOT
Mini MP 160 V.V.
B
LADE LOCKING
S
OLID EMULSIFYING DISC
B
ELL
R
EMOVAL
DIRECTION
D
RIVE COUPLING
B
LADE REMOVAL
B
LADE LOCKING
EMULSIFYING DISC
Mini MP 160 V.V.
F
OOT
B
LADE REMOVAL
• WHISK FUNCTION
(Mini MP 190 Combi and Mini MP 240 Combi )
Attaching the gear box to the motor unit.
- Check that the machine is not plugged in.
- Insert the threaded part into the motor unit.
- Turn the gear box in the direction of the arrow (see
figure) until it is locked into place moderately tightly.
Removing the casing
- Check that the machine is not plugged in.
- Turn the gear box in the opposite direction to that
used when attaching it.
Fitting the whisks into the gear box
- Grasp the holder in one hand.
- With the other hand, take the first whisk and insert
the shaft A into the bore
B
drive shaft. Make sure the drive lugs
properly aligned with the notches.
- As you push the whisk into the gear box drive
C
shaft , rotate it slightly in order to slot the drive
lugs into the notches E of the drive shaft
thereby locking the whisk into place inside the shaft.
of the gear box
are
D
,
C