Página 1
Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Delta faucet you will need: • To READ ALL the instructions completely before beginning.
Página 2
Install Pop-Up Assembly SHUT OFF WATER SUPPLIES. Apply silicone to underside of flange (1). Remove stopper (1) and flange (2). Remove old faucet. Place gasket (1) on bottom of new Insert body (2) into sink. Screw flange onto Screw nut (3) all the way down. Push faucet.
Página 3
CONNECT TO WATER SUPPLIES. FLUSH SYSTEM/CHECK FOR LEAKS. (HOOK-UPS NOT PROVIDED). Remove aerator (1) and turn faucet handles (2) all the way on. Turn on hot and Determine which type of connection you will be cold water supplies (3) and flush water lines for one minute. making.
Página 4
Maintenance If faucet exhibits very low flow: A. Remove and clean Aerator (3) (page 5), or SHUT OFF WATER SUPPLIES B. Clean Seats and Springs (2) of any debris. Install stems (1) correctly for proper handle rotation: If faucet leaks from spout: Note: The stops (4) must point to the center of the faucet for Replace Stem Unit Assembly (1) and Seats and Springs (2)*, proper handle rotation.
Página 5
Specify Finish ▲ Especifíque el Acabado Précisez le Fini RP42092▲ Lift Rod RP74977▲ Barra de Alzar Hot & Cold Lever Handles w/Set Screws Tige de Manoeuvre Manijas en palanca de agua fría y caliente con tornillos de ajuste Manettes-leviers d’eau chaude et d’eau froide avec vis de calage Order this RP number if Order this RP number if your...
Página 6
Dans le cas d’une utilisation commerciale, la garantie est d’un an à compter de la date d’achat. pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Delta Aucune garantie ne couvre les piles.