Página 1
Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Delta faucet you will need: ・To READ ALL the instructions completely before beginning.
Página 2
Secure end valves with gaskets (1), washers (2) & threaded brackets SHUT OFF WATER SUPPLIES. Remove old faucet. Slide hot and cold (3). Hand tighten brackets (3) onto shank (4). Lock brackets into end valves (1) with gaskets (2) through sink mounting holes. Make sure position by tightening screw (5).
Página 3
1/2" (13 mm) IPS Install Pop-Up Assembly CONNECT TO WATER SUPPLIES. Apply silicone to underside of flange (1). (HOOK-UPS NOT PROVIDED). Remove stopper (1) and flange (2). Determine which type of connection you will be making. Insert body (2) into sink. Screw flange onto Screw nut (3) all the way down.
Página 4
* Install stems (1) correctly for proper Maintenance handle rotation: SHUT OFF WATER SUPPLIES FLUSH SYSTEM/CHECK FOR LEAKS. Note: The stops (4) must point to the When replacing a parts, follow the Remove aerator (1) and turn faucet handles (2) to the full on center of the faucet for illustrated instructions provided on the mixed position.
Página 5
▲ Specify Finish RP74151▲ Especifíque el Acabado Hot & Cold Lever Handles w/Buttons & Screws Précisez le Fini Manijas en Palanca con Botones y Tornillos de agua fría y caliente Manettes-leviers d’eau chaude et d’eau froide avec boutons et vis RP20547▲...
Dans le cas d’une utilisation commerciale, la garantie est d’un an à compter de la date d’achat. pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Delta Aucune garantie ne couvre les piles.