bora CKAS-UM-0030512 Manual De Instrucciones Y Montaje página 43

Mounting instructions
Attach the transition piece (curved or straight)
to the intake port. Seal the channel connection
with the enclosed sealing tape such that it is
airtight.
Now insert the lower end of the silence module
in the transition piece (curved or straight) from
above.
Connect the patch cable to the intended plug-in
position of the power electronics and lay the
second connection upwards in the direction
of the hob extractor. Ensure that the plug-in
positions are not under tension due to
a possibly tensioned cable.
Now place the pre-prepared kitchen cupboard.
You can attach it to the adjacent frames.
Ensure that the Schuko plug on the base
fan continues to remain accessible.
43
GB