Control Buttons - Vuzix iWear AV230XL Guia Del Usuario

Note: The iWear AV230 XL automatically turns off after 30 second of no
video input.
Turn on your audio/video device and configure it for an external
display.
Press the power button to turn on your AV230 XL.
If required, adjust the AV230 XL focus.
Your AV230 XL has independent left and right
eye focus adjusters under the front left and
right corners.
Getting the Most from Your Video Eyewear

Control Buttons

A series of four buttons on the battery pack allow you to adjust
various aspects of your AV230 XL.
The top button, nearest the connector, is
the Power/OSD button. It allows you to turn
your Vuzix AV230 XL on and off and
access the On Screen Display (OSD) menu.
•
•
•
The plus sign identifies the Increase button, used to
increase
brightness, etc.
•
•
The minus sign identifies the Decrease button, used
to decrease selected setting such as volume, brightness, etc
•
•
Press once to turn on AV230 XL
Press again to access the OSD menu
Press and hold to turn off AV230 XL
selected
Increase volume, when OSD is not displayed.
Increases current OSD selection, when OSD
is displayed
Decrease volume, when OSD is not displayed.
Decreases current OSD selection, when OSD is
displayed
setting such
6
as volume,
.