auna Paris Manual Del Usuario página 25

Connecting multiple speaker tables
The TWS function allows you to connect two speaker tables together. The
first table is the master, which is connected to the BT unit and controls
all functions. The second table is the sub-loudspeaker that delivers True
Wireless Sound.
• Turn on both speaker tables and double-click the On/Off button on
either speaker table. Both speakers will go into pairing mode and you
will hear an audible signal. The blue LED indicators on both speaker
tables will flash rapidly at the same time. After pairing, the LED
indicator of the first speaker (master) flashes slowly, the LED of the
second speaker (sub-loudspeaker) lights up green. After connection to
a smartphone or another BT device, the master loudspeaker LED lights
up continuously blue, the sub-loudspeaker LED lights up continuously
green.
• When the speaker tables are successfully paired, briefly press the On/
Off button on the master speaker or sub-speaker to exit TWS mode.
• If the speakers are connected to a BT device in paired TWS mode, the
two speakers can still work as paired speakers if you plug the AUX cable
into the AUX jack on the first speaker (master). On the master speaker,
the LED lights up green and blue, on the sub-speaker, the LED lights
up green. The TWS mode is deactivated when an AUX cable is also
connected to the AUX jack of the sub-speaker.
• In TWS mode, calls can only be accepted at the master speaker.
Auto power off
If no BT connection is established after switching on the loudspeaker, the
BT connection has been disconnected or no LINE IN signal is received, the
loudspeaker automatically switches off after 10 minutes and „Power off"
sounds.
EN
25