Technical Specifications - tbs electronics Powersine Combi PSC1600-12-60 Manual Del Propietário

7. TECHNICAL SPECIFICATIONS

Parameter
Inverter stage
1)
Output power
Output voltage / frequency
Output waveform
Input voltage (± 3% tolerance): Nominal
Maximum efficiency
No load power consumption
Charger stage
AC input voltage
Maximum continuous charging current
Standard charge voltage (bulk / float @ 25°C)
Charge algorithm or program
AC Transfer switch
Maximum continuous current
Transfer time (typical)
General
TBSLink enabled
Protections
DC connections
AC connections
Enclosure body size
Total weight
Protection class / Op. temp. / Storage temp.
Standards
1) Measured with resistive load. Power ratings are subject to a tolerance of 10% and are decreasing as temperature rises with a rate of
approx. 1.2%/°C starting from 25°C.
2) Undervoltage limit is dynamic. This limit decreases with increasing load to compensate the voltage drop across cables and connections.
3) Measured at nominal input voltage and 25°C
4) At higher ambient temperatures, maximum output current shall be reduced automatically
Pnom
P10minutes
Psurge
Range
3)
[ASB]
4)
0ms (inv. → mains) / < 5ms (mains → inv.)
high/low battery voltage, high temperature,
high ripple voltage and low AC input voltage
complying with EN60335-1, EN60335-2-29
Note : the given specifications are subject to change without notice.
23
PSC1600-12-60
1300VA
1600VA
2500VA
230VAC ± 2% / 50Hz ± 0.05%
True sinewave (THD < 5%
12V
2)
10.5 – 16VDC
92%
< 10W [2.0W]
185 – 270VAC / 45 – 65Hz / PF > 0.95
60A
14.3V / 13.3V
IUoUoP, intelligent 4 stage, temp. comp.
16Arms
Yes
overload, short circuit,
Two wires, length 1.5 meters, 35mm
Screw terminals
351 x 210 x 114mm
10.7kg
IP21 / -20°C .. +50°C / -40°C .. +80°C
CE marked meeting EMC directive
2004/108/EC and LVD 2006/95/EC
and RoHS 2002/95/EC
PSC1800-24-30
1400VA
1800VA
3000VA
1)
@ Pnom)
24V
2)
21 – 32VDC
94%
< 12W [3.5W]
30A
28.6V / 26.6V
2