After Use; Transport; Maintenance - STEAMONE H3S Guia Del Usuario

After use

Never touch the steam head until it has cooled down completely.
.
- After using the garment steamer, switch the power off. The power indicator
light will go off, and you can then unplug the device.
- Hang the steam head in an upright position on the hook when not in use. (fig.1)
- Wrap the cord around the power cord storage area under the base of the
steamer.
- Always empty the water tank before storage.
- Do not carry the steamer by the water tank handle, this will remove the tank
and the unit will fall to the floor.

Transport

Always make sure the pole is firmly attached to the base unit
before lifting up the device (see assembly instructions).
- Your device has four wheels for ease of transport. Grasp the pole and pull gently
to move the device.
- You can also lift up the device in order to move it, again holding the device at the
base of the pole.

Maintenance

It's preferable to use distilled or demineralized water to
reduce scaling.
- To maintain
occasionally. The time between descaling operations depends on the quality of
the water and the frequency with which you use the appliance. On average, the
appliance must be descaled after 30 hours of use.
Ensure that the appliance has cooled down completely (2 hours
minimum).
maximum performance, your steamer must be descaled
13