Temperature Selection - SEVERIN HC 0611 Instrucciones De Uso

- before cleaning the appliance.
■
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
■
Do not place the appliance on any surfaces
sensitive to heat during or immediately after
use.
■
This appliance is not intended for use by
any persons (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
■
Children should be supervised to ensure
that they do not play with the appliance.
■
Caution: Keep any packaging materials
well away from children, as they are a
potential source of danger e.g. from
suffocation.
■
No responsibility will be accepted if damage
results from improper use, or if these
instructions are not complied with.
■
This appliance is intended for domestic use
only and not for commercial applications.
■
In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by qualified
personnel, including the replacement of the
power cord. If repairs are needed, please
send the appliance to one of our customer
service departments. The address can be
found in the appendix to this manual.
Before using for the first time
The appliance and the heating plates should
be wiped clean with a slightly damp cloth
before use.
Operation
- The appliance is designed for use on dry or
wet hair.
- Open the locking catch.
- Insert the plug into a suitable wall outlet.
- Use the On/Off switch to turn the appliance
on and use the temperature control buttons
to set the desired level. Pre-heating starts
as shown by the flashing indicator light.
■
During the heating phase, the appliance
should be placed on a firm, heat-resistant
surface.
- Once the desired temperature has been
reached, the indicator lights is steady.
- Take each strand of hair as close as
possible to the roots and place it between
the heating plates.
- Bring the two arms together on the hair and
gently pull through the hair, starting from
the roots and working your way out to the
ends.
- Open the arms.
- Check whether the result is as desired.
- If you wish the shaping to be more
pronounced, repeat the process and allow
the heat to take effect for a slightly longer
period.
- The appliance will switch off automatically
after 45 minutes.
- Remove the plug from the wall socket after
use.

Temperature selection

To prevent the hair from being damaged,
always start with a low temperature setting,
e.g. 130-150°C for thin or sensitive hair, and
160-180°C for thicker hair. If the hair can be
straightened at that setting in two cycles, no
further increase in temperature is necessary,
as the optimum setting has already been
reached.
General care and cleaning
■
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has completely cooled down.
■
To avoid the risk of electric shock, do not
clean the appliance with water and do not
immerse it in water.
■
Do not use abrasives or harsh cleaning
solutions.
- The exterior of the appliance may be wiped
with a slightly damp, lint-free cloth.
- The heating plates may be cleaned with a
10