Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. ATTAcH cRoSS RAilS AnD coVeR RAilS To FRonT enD RiB
A. Assemble 2 Cover Rails using parts as shown.
B. Assemble 3 Cross Rails using parts as shown.
C. Connect the Cross Rails to the End Rib with the ShelterLock
D. Place a Cover Rail at each leg and secure it with a Cover Clamp as shown. Slide the Cover Rails so they are
8 inches up from the ground. Only HAND-TIGHTEN these bolts!
ShelterLock
3X connections use #03032 (1
®
Assemble Cover Rails
A
13345
800163
No Bolt at this connection
Assemble Cross Rails
B
10115
800599
800599
01010
4. connecT FiRST MiDDle RiB To FRonT enD RiB
ShelterLock
3X connections use #03032 (1
®
Cross Rails face toward the inside of the AutoShelter
800939
/
7
") Bolts. Cover Rail Clamp connections use #10115 (1
8
Cross Rails
Cover Rails
/
7
") Bolts. Cover Rail Clamp connections use #10115 (1
8
13201
3X.
®
800939
.
®
800939
800939
13201
Page 5
c
800939
Cross Rail
D
13202
10115
Cover
Rail
01011
01010
Middle
13201
Rib
01011
01010
noTe:
The bolt heads at
the end ribs must be facing
outward to avoid damaging
your cover.
/
5
") Bolts.
8
03032
01010
End Rib
/
5
") Bolts.
8
10115
Cover Rail
05_62689_0C
Publicidad
Tabla de contenido
