Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The appliance includes a double rechargeable battery peck. It must
•
not be dismantled, exposed to an open flame or short-circuited.
Never expose the trimmer to temperatures below -10°C or higher
•
then +40°C for longer periods of time.
No responsibility is accepted if damage results from improper use,
•
or if these instructions are not complied with.
M
C
AIN
OMPONENTS
1. Power charger
2. Lubricating oil & Brush
3. Comb attachments 3, 6, 9 and 12mm
4. Battery pack
S
-
HORT
TIME OPERATION
The appliance is designed to be operated for a short period, i.e. the hair trimmer can
be operated without interruption for a maximum of 10 minutes. Operation can be
resumed after the appliance has cooled down for approximately 20 minutes.
A
DJUSTING THE CUTTING LENGTH
– The normal cutting length of the clipper without attachment comb is approx. 0.8 –
2.0 mm.
– The adjustment ring on the body of the device can be used to vary the cutting
length between 0.8mm to 2.0 mm.
A
TTACHMENT COMB
The hair clipper is supplied with 4 attachment combs, which can be used to vary the
cutting length. By using the attachment combs, the cutting length is increased by
approx. 3mm, 6mm, 9mm or 12mm. The attachment comb is slipped over the front
edge of the clipping comb until it reached the limit stop. After use, simply pull
forward and take off.
C
HARGING METHOD
If the electric hair clipper hasn't been used for a long time, it should be charged one
time in 3 months to keep the batteries operating life. For the first time, it can be
Instructions manual
5. Charging light indicator
6. ON/OFF switch
7. Cutting length adjustment
8. Cutting head
English
3
Publicidad
Tabla de contenido
