Manuales relacionados para Truper ExpertvSDS Max RMAX-7NX
Resumen de contenidos para Truper ExpertvSDS Max RMAX-7NX
- Página 1 Instructivo de SDS MAX Joules Hammer Drill Impact energy RMAX-7NX Applies for: Code Model 100868 RMAX-7NX Read this manual thoroughly CAUTION before using the tool.
-
Página 2: Tabla De Contenido
Contents CAUTION Technical Data Power requirements To gain the best performance of the tool, prolong the duty life, General power tool safety warnings make the Warranty valid if necessary, and to avoid hazards Safety warnings for the use of fatal injuries please read and of hammer drills understand this Manual before using the tool. -
Página 3: Technical Data
Technical Data RMAX-7NX Code 100868 Description Hammer Drill SDS MAX Chuck SDS max Voltage 127 V~ Frequency 60 Hz Current 10 A Power Impact energy 1 100 W 7 Joules Weight 6 kg Maximum drilling power in concrete Bit: 35 mm Drilling diameter in concrete with hollow bits 90 mm Speed... -
Página 4: General Power Tool Safety Warnings
General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Página 5: Safety Warnings For The Use Of Hammer Drills
Safety warnings for the use of Hammer Drills Choose the appropriate drill or attachment While operating the hammer drill CAUTION • The tool is designed to work with bits CAUTION • Hold the tool by its handle and by or accessories with SDS-max shanks. Choose the the auxiliary handle. -
Página 6: Parts
Parts Function Vibration Anti-skid Selector deposit cap Absorber handle SDS MAX Chuck Trigger Switch Depth Control Rod Maintenance Indicator Spare Carbon Brushes Auxiliary Handle Speed Adjustment Knob Power Cable Protection Grease LED Power Tube Indicator Power Cord Mounting and Adjustments Auxiliary Handle Operate the power tool only with the CAUTION... - Página 7 Mounting and Adjustments Mounting bits and accessories CAUTION To prevent accidents, confirm that the switch is turned off and disconnect the plug from the power supply. WARNING Always wear gloves when changing accessories. They can become extremely hot during operation. •...
-
Página 8: Start Up
Start Up Function Selector • Be sure to use the function selector (A) only when the motor is completely stopped. WARNING On no reason try to adjust the function selector with the motor running, the tool could rotate abruptly, causing unexpected accidents. IMPACT--- ROTATION ( WARNING This function is intended for working... -
Página 9: Maintenance
Start Up Safety Clutch Additional Information The tool has a safety clutch, which interrupts spindle power • SDS MAX accessories require freedom to move within (causing a rattling noise), if the accessory jams. Should this the bit, which causes eccentricity when the tool is possibility occur: unloaded. -
Página 10: Notes
Notes ENGLISH... -
Página 11: Authorized Service Centers
In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN FIX FERRETERÍAS... -
Página 12: Warranty Policy
. Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Jilotepec, Edo. de Méx. C.P. 54240 Stamp of the business.