Troubleshooting - Gardol GLH-S-2800 Traducción De Las Instrucciones Originales

Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment.

14. Troubleshooting

The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equipment
fails to work properly. If the problem still persists after working through the list, please contact your nearest service work-
shop.
Fault Possible cause
Motor is overloaded.
Motor does not start
No electricity
Blade cylinder rotates anti-clockwise. Change the rotational direction (see Operation).
Garden waste is not No electricity
drawn in.
Blade cylinder has become blocked.
Shredding material is Counter blade is not set correctly.
tangled.
26 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Improper handling of waste equipment may have
negative consequences for the environment and hu-
man health due to potentially hazardous substances
that are often contained in electrical and electronic
equipment. By properly disposing of this product, you
are also contributing to the effective use of natural
resources. You can obtain information on collection
points for waste equipment from your municipal ad-
ministration, public waste disposal authority, an au-
thorised body for the disposal of waste electrical and
electronic equipment or your waste disposal compa-
ny.
Remedy
Turn the shredder on again (see Operation).
Have the socket, cable, lead and plug checked by
a trained electrician (see Electric connection).
Push shredding material with special pushing de-
vice for shredder.
Remove blockage (see Operation).
Re-adjust counter blade (see Operation).