Sefa ROTEX V3 Serie Guia Del Usuario página 10

2021-03-25
f� Auto-swing (pro version)
1.
2.
3.
g� Operating cycle
Rotex One
1.
2.
3.
4.
5.
6.
8.
9.
10.
Pressing the on-screen stop button during a cycle will stop the cycle.
Rotex Lite / Pro
1.
2.
3.
4.
5.
6.
8.
9.
10.
Pressing the on-screen stop button during a cycle will stop the cycle.
10
Pivot the head of the machine as far as it will go to the right
Enable the auto-swing system by turning the cover and pressing the
button.
Disable the auto-swing system by pivoting the head of machine as far as
it will go to the right, turning the cover and pressing the button.
Place the work item on the lower platen.
Position the transfer sheet correctly.
Move the arm over the platen you are working on.
Lower the heat platen by the handle.
The timer will start when the heat platen is lowered.
The press will emit a signal when the timer has finished.
Raise the heat platen manually by the handle.
Move the arm away from the work platen.
Repeat from step 1 above.
Place the work item on the lower platen.
Position the transfer sheet correctly.
Move the arm over the platen you are working on.
Lower the heat platen by the handle.
The timer will start when the heat platen is lowered.
The press will emit a signal when the timer has finished.
The heat platen will lift open automatically.
Move the arm away from the work platen (automatic on Pro version).
Repeat from step 1 above.
www.sefa.fr