Sefa CLAM PRO V3 Serie Guia Del Usuario página 13

f� Other settings
The green leaf icon is used to set energy-saving mode.
The operator can use two energy-saving modes :
- Hibernate
▶ Hibernate start time
▶ Heating restart time
- Sleep
▶ Sleep temperature (40°C (104°F) to 140°C
(284°F))
▶ Idle time before sleep mode
The board will only switch to eco mode if it is on the home
screen. If the user leaves the press on another screen, the
screen is presumed to be in the process of being altered. Sim-
ply touch the screen or start a cycle to exit energy-saving mo-
des that are currently running.
The "i" at the top right provides key information about the sof-
tware version and SEFA contact details.
The diagnostic button brings up the machine status so you
can see if there are currently any malfunctions. If there are,
contact your distributor support department.
The last icon is home, which takes you back to the machine's main menu.
www.sefa.fr
Lets you choose whether the machine emits a sound each time the touch screen is used.
Lets you enable or disable an alarm when the pressing time is complete.
Lets you choose the unit of temperature : Celsius or Fahrenheit.
Lets you enable another timer for the pressing time. With this option enabled, you
can alter 2 times in the pressing time menu.
The left arrow takes you back to the previous menu. The right arrow takes you to
other settings.
The setting in the top left corner shows that the machine is pressing within the set tempera-
ture range. This range can be set by pressing the icon and entering the 2 required tempera-
tures. A non-locking warning will be displayed. It will be ignored during the 2nd pressing and
allows the work continue even if the setpoint is not reached.
The setting at the top right lets you adjust the screen brightness.
The left arrow takes you back to the previous menu.
User guide - SEFA CLAM PRO V3 Series
2 min
13