Philips NORELCO AT790 Manual De Instrucciones página 21

C
11 Insert the notch of the shaving unit into
the slot in the top of the shaver and leave
open to allow the cutters and combs to air
dry thoroughly.
12 Close the Shaver Head Assembly and put
the Protective Cap on shaver to protect
heads.
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.
After Each Use: Trimmer
1 Turn shaver OFF.
C
2 Push down spring-release trimmer switch.
C
3 Clean the trimmer by rinsing under hot
water and allow to air dry thoroughly.
C
4 Lubricate the trimmer teeth with one
drop of mineral oil every 6 months.
Close trimmer by pressing trimmer down.
5
ENGLISH
21