Nikon COOLSHOT 40i Manual De Instrucciones página 15

3-3. Press the POWER ON/Measurement button to start measurement.
After measurement, the result is displayed for approx. 8 seconds, then power automatically turns off.
If you press the POWER ON/Measurement button during power-on, another measurement starts.
Example of measured distance
* Continuous measurement function
Press and hold the POWER ON/Measurement button to start continuous measurement up to approx.
8 seconds. During measurement, the measured result is displayed consecutively while the laser
irradiation mark is blinking.
If you release your finger from the button, continuous measurement stops.
When measuring a flagstick at a golf course, for example, set First Target Priority
mode. Keep targeting the flagstick at the center of the target mark with the
continuous measurement function to minimize handshake.
Example of measurement failure
display
En
Es
Fr
Pt
15