Start Up - Truper PIPI-310 Manual De Instrucciones

Start Up

Volume Selector
• Turn the screw (A) to adjust the volume of the fluid to be
sprayed.
• Turn the knob (B) to regulate the fan size to be sprayed.
• Turn the spryer (C) to change the fan angle.
Vertical Fan Circular
Spraying Tips (1)
• To get good results, keep the gun always level and
parallel to the surface (E). Keep the nozzle 7" - 9.8" and
spray evenly from one side to the other and up and down.
Do not spray in an angle (F). Otherwise the paint may run
through the surface. Go in light and uniform passes.
Start up
• Start the compressor.
• Press the trigger (D) to open the air flow and start
suctioning the product from the jar. Point the paint gun
towards a piece of cardboard until the spray flows.
• Release the trigger to stop the spray flow.
Horizontal Fan
C
E
B
D
F
ENGLISH
A
7