Assembly And Operation - Oh!FX E-SHOT 220 Manual De Instrucciones

ASSEMBLY AND OPERATION

Placement: Prior you fi x the device, make sure that you have enough height or space around
for the confetti or streamers which will be projected, preventing that they may impact against
people or objects, causing damage.
1. Place the ESHOT 220 device in the intended place, either on a fl at and stable surface
or hung on a truss structure using a clamp screwed into the nut anchor (8). Ensure the
machine with a safety cable.
2. Connect the power plug (4) to the electricity source or power control.
3. You can use diff erent control systems to fi re the machine (eg: 1 CHANNEL FX PUSHER,
1 CHANNEL DMX SWITCH, etc.). Once connected your control system, make a shooting
test without plugging any electric cannon. If the setup is correct, the led indicator (6) will
light on, while you are doing the fi ring test.
4. Insert the electric confetti cannon (8) in the accommodation cylinder (1) and secure it
by tightening the safety fi xing knob (3). There exist safety cables (as accessories not
included), to further ensure the electric cannon so that it cannot get projected.
5. Adjust the desired inclination of the device and tighten the locking knob (2)
6. Connect the plug of the electric cannon (8) in the connector for electric cannons (5) of the
device.
7. Shooting: The device is now ready for use. Simply push on the switch power control to
make a shot.
GENERAL CAUTION FOR E-SHOT 220
The function of the E-SHOT 220 is the release of confetti and streamers Any other use,
diff erent from the written excludes Oh!FX (CONFETTISHOTS SLU) of liability and warranty
• Use only the consumables intended for that specifi c use, and duly certifi ed.
• In case of malfunction, do not attempt to disassemble the machine and contact the
distributor or manufacturer. Any manipulation may exclude the warranty
• Do not wet the machine. To clean it, use a damp cloth and dry it immediately.
• Only one adult and qualifi ed person must manipulate the machine.
3
INSTRUCTION MANUAL