M-Audio OXYgen 25 Manual Del Usuario página 8

Memory Dump: The SysEx Memory Dump function (Mem Dump) will send the contents of all 10 Preset memory
locations for storage in a DAW application. Please refer to the documentation provided with your DAW software for
information on how to record SysEx MIDI data.
1. Prepare a MIDI track within your DAW software to record from your Oxygen 25 keyboard.
2. Press the Edit button on your Oxygen 25 keyboard.
3. Start the MIDI recording in your DAW software.
4. Press the Memory Dump key on your Oxygen 25 keyboard. The SysEx memory dump will begin immediately
and the LED screen will display "SYS" to indicate that data is being sent. The SysEx file will appear as a new
MIDI recording in your DAW software.
Restoring a Memory Dump:
IMPORTANT: Restoring a saved Memory Dump will permanently overwrite all current presets on your Oxygen 25
keyboard. Restored settings will not become active until a new preset is loaded on your Oxygen 25 keyboard, or the
device has been powered off and on.
Play back a MIDI track that contains a previously recorded Oxygen 25 SysEx Memory Dump. The SysEx data is sent
back to the Oxygen 25 keyboard. The Oxygen 25 LED screen will display "SYS" while receiving the SysEx data.
Store: The Store function saves control assignment settings to one of 10 memory locations.
IMPORTANT: Storing new assignment settings will overwrite the contents of the selected memory location.
1. Press the Edit button.
2. Press the Store key. The LED screen will show the number of the last selected memory location (for example,
P.0.1).
3. Enter the number of the memory location you want to store the new settings to by using the number keys or the
"<" or ">" buttons.
4. Press the Enter key to save the changes and overwrite the previous settings of the memory location.
NOTE: The Oxygen 25 factory presets can be restored by holding down the "-" and "+" buttons during power up.
This will permanently erase all customized user settings.
IMPORTANT: This will permanently erase all customized user settings.
Number Keys: This section of the keyboard is used to type in numerical parameter values while in Edit mode.
Enter Key: The Enter key confirms changes made and exits Edit mode.
NOTE: The Panic and Memory Dump functions take immediate effect when the corresponding key is pressed. Edit
mode will exit automatically.
8