Initial Start-Up - ARVA Link Modo De Empleo

Initial start-up

Fitting batteries and advice
The ARVA LINK only operates with 4 standard AAA/LR03 alkaline batteries.
Open the battery compartment cover with a screwdriver or coin, or using the screws. The 4 batteries
must always be of the same brand and replaced at the same time. Insert the batteries carefully, as
per the directions shown in the compartment.
Avoid touching the contactors. Store the unit above 0°C to prevent battery deterioration.
NEVER USE rechargeable or lithium batteries. These do not resist cold and/or discharge in one
go (unlike alkaline batteries, which discharge gradually).
Remove the batteries if the device is left unused for a long time (especially in summer). If batteries
leak, the warranty does not apply.
Initial start-up (on removal from box)
1
Switch the unit on
When you briefl y press the top-right button, the screen facing you lights up and performs
its self-tests (transmission power, screen, loudspeaker, etc.)
For fi rst use:
The Confi g screen appears automatically
1 - Select a language
2 - Enter your contact details (surname / fi rst name, and contact telephone
number in case of emergency)
3 - Calibrate the compass
To access a confi guration line, press the central fl ag button in the parameter to be chan-
ged. To scroll up and down, press the left- and right-hand arrow buttons, and validate using
the central fl ag button.
If you reset the device, these steps must be repeated (Reset function in confi guration
menu).
If your device has been switched on in-store for testing, refer to page 6 to re-access the
confi guration menu.
The available settings are:
• Language (French / English / German / Italian / Spanish)
• Owner contact details (name, telephone number, etc.)
• Compass calibration (setting, p.6)
• Mode (Novice, p.9; or Expert, p.10)
• W-Link region (Region A / B or Deactivated)
• Automatic return to transmit (4 minutes / 8 minutes or inactive)
• LCD contrast (Very Low, Low, Medium, Strong, Very Strong)
• Reset (all settings return to default confi guration)
• Exit (to exit the confi guration menu)
To confi gure the other settings, see pages 6-7.
The underscored options in the above list are default settings. They are obtained if you
reset.
14
2
. You must:
1
BIP
BIP
BIP
2
Confi g
Language: GB
Mode: Expert
Calibration: Ok
WLink: Reg. A
Send: 4 min