Tabla de contenido
Publicidad
STEP 2B Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injuries and property damage!
●
Mount the wall plate
19
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
Minimum horizontal space between fasteners: 24 in. (610 mm)
NOTE: All five fasteners must be used, the minimum horizontal space for top middle fastener: 8 in. (203 mm)
●
For concrete applications, arm
1.
Position the wall plate
one in the top inner-most hole location as shown.
NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com.
2.
Drill five pilot holes using a 3/8 in. (10 mm) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 4 in. (101 mm). Never drill into the mortar between blocks.
1
8 in.
Min.
(203 mm)
24 in. (610 mm)
Min.
12
directly onto the concrete surface
(STEP 3) must remain centered in wall plate
23
on the wall at your desired height. Level the wall plate and mark the five hole locations, four in the corners and
19
Solid Concrete or Concrete Block Option
. Keep this in mind when selecting the wall plate location
19
2
19
4 in.
(101 mm)
3/8 in.
(10 mm)
Publicidad
Tabla de contenido
