Toolland TC78038 Manual Del Usuario página 4

4. Features
 wrap yourself in a dry and warm towel after every bath or shower thanks to this electric towel warmer
 splash proof (IP22)
5. Installation
Install so that the switches and controls cannot be touched by a person standing in
1. Slide the brackets onto the towel warmer.
2. Measure the distance between the brackets and mark on the wall.
3. Drill the holes in the wall and insert a nylon plug in each of the holes.
4. Insert the support block inside the bracket and fix the brackets onto the wall with the included screws.
V. 01 – 30/05/2016
Install so that the lower rail is at least 600 mm above the floor.
the bath or shower.
TC78038
WARNING
4 ©Velleman nv