Black+Decker VCBD603 Manual De Instrucciones página 11

17. Slide clip off and empty permanent bag into trash.
CLEANING PERMANENT DUSTBAG
18. Hand wash the permanent bag with soap and water.
19. Hang it up to air dry thoroughly before replacing in the permanent bag compartment.
20. Also clean and wash the motor filter and dry thoroughly before reinstalling.
REINSTALLING PERMANENT DUST BAG
21. Slide clip onto the permanent bag.
22. Insert the bag collar with arrow in the down position.
23. Place collar all the way down into the track guides.
24. Close the canister lid.
EXHAUST HEPA FILTER
The exhaust HEPA filter is located at the back of the canister.
25. Push down the locking clip on the exhaust HEPA filter cover and pull out.
26. Grasp the filter and pull out.
27. Hand wash the filter with soap and water and dry thoroughly before reinstalling.
28. Press lid release to open permanent bag compartment.
MOTOR INTAKE FILTER
The intake filter is located inside of the vacuum.
29. Before cleaning the filter remove the permanent dust bag.
30. Press lid release to open permanent bag compartment.
31. Grasp the motor intake filter and pull out.
32. Hand wash the filter with soap and water and dry thoroughly before reinstalling.
33. Insert the filter back into the canister or replace with a new filter and snap cover back in place.
STORAGE
Unit stores vertically for compact storage.