Recording from
the radio or a
CD
You can record from the radio or a
CD to an MD using the REC
button. You can start or stop
recording at any point you want.
You can also pause recording.
Notes
•
After you
stop
recording,
do not disconnect the
AC power cord or
move the player
while "TOC EDIT" is
flashing in the
display. If you do so,
recording may not be
done properly.
• While recording from
radio, you cannot
change the station.
• If you turn up the
volume too high,
sound skipping may
occur.
Tips
• To record over the
previous recording, see
page 38.
• To add track marks
during recording, press
REC where you want to
add track marks.
• To add track marks
after recording, see
"Dividing recorded
tracks" on page 44.
36
GB
Recording
REC
MD ^
Recording from the radio
When receiving conditions are good, track marks are
added on the MD automatically:
– when there is no sound input during recording for
more than 2 seconds.
– when a soft sound like pianissimo continues during
recording.
– when you pause recording.
If unnecessary track marks are added, erase them after
recording (see "Combining recorded tracks" on page
46).
1
Tune in the station you want to record from.
2
Insert a recordable MD.
3
Press REC (r on the remote).
The player stands by for recording.
4
Press MD ^ (MD ( or MD P on the remote).
Recording will be made from the last recorded
position.
To stop recording
Press MD p.
RADIO BAND
CD p
CD ^
Jog dial