Installation Instructions - nedis DTCTS30WT Manual De Uso

7. Battery connector
Take off the plastic seal of the battery and connect the battery with the battery
connector. After placing the battery test the alarm with the test button to ensure
it is working properly (see testing the smoke alarm).
When the mounting plate is mounted and the smoke alarm tested after
inserting the battery, place the smoke alarm on the mounting plate by turning it
clockwise.
Read the following chapter to find out which places in your house are the best
choices to mount the smoke alarm(s).

Installation instructions

Install a smoke alarm in every room or area on every level of the home
Smoke may not reach the smoke alarm if it is installed in only one room or area. If
a fire starts in another room or area than where the smoke alarm is installed, the
smoke alarm will not detect the smoke, or it will detect it too late. A smoke alarm will
not promptly detect a fire except in the room or area in which it is installed.
Place at least one smoke alarm in every room/area that is on your way from the
bedroom to the front door.
It is recommended to make a flight plan and practice it with the household members
in case of an emergency.
The requirements for the installation of a smoke alarm may differ per region. Please
contact your local authorities for possible additional requirements.
Example for the installation of smoke alarms:
4
ENGLISH