Publicidad
Idiomas disponibles
Idiomas disponibles
C
NOTE
•
Adding laundry after the drying operation
starts may cause the dried laundry inside
the machine to mix with wet laundry and
leave the laundry damp at the end of
operation.
•
Adding or removing laundry during drying
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and
thus increases programme duration
and energy consumption. So, it is
recommended to add laundry before the
programme starts.
•
If a new programme is selected by
turning the programme selection knob
while the drying machine is in stand-by, the
running programme terminates.
WARNING!
•
Do not touch the inner surface of the
drum while adding or removing clothes
during a continuing programme. The
drum surface is hot.
5.10 Cancelling the programme
If you want to cancel the programme and
terminate the drying operation for any reason
after the drying machine starts running, turn the
On/Off/Cancel knob, the programme will be
cancelled.
A
WARNING!
•
The inside of the drying machine shall
be extremely hot when you cancel the
programme during machine operation, so
run the refresh programme to allow it to
cool down.
Dryer / User Manual
5.11 End of programme
When the programme ends, the Fibre Filter
Cleaning and Water Tank warning symbols on
the programme observation indicator turn on.
Loading door may be opened and the dryer
machine becomes ready for another run.
Bring the On/Off/Programme selection knob to
On/Off position to turn the drying machine off.
C
NOTE
•
If the laundry is not removed after the
programme is completed, the wrinkle
prevention function activates for 2 hours
to prevent the laundry inside the machine
to get wrinkled. The programme tumbles
the laundry with 10-minute intervals to
prevent them from wrinkling.
15
Publicidad
