Introduction; Safety Information; Declaration Of Conformity - Kroeplin C0 Serie Manual De Instrucciones

Introduction

We thank you very much for your confidence in purchasing this product.
This measuring gage is manufactured with high precision parts and carefully adjusted.
Therefore never try to disassemble or change any of the interior parts of this gage.
Do not modify the measuring arms. Do not drop or shock this gage.
Protect gage against high temperature, humidity, dust and dirt.
For a better accuracy and repeatability this gage should be used within an operating
temperature of 20 +/-10°C.
This gage is used to measure external diameters, especially measuring wall thicknesses. The
gage is supported by intelligent controlled measuring programs. It should only be used for
this purpose. Kroeplin assumes no responsibility for damages caused by inexpert handling.
In order to achieve the best use of this measuring instrument it is most important
that you first read the operating instructions and have it ready to hand.
Safety information / EC – Declaration of Conformity
This gauge uses a lithium polymer battery:
• Do not incinerate or apply heat to the battery (see „Technical details").
• Do not pierce, open or disassemble the battery.
• The battery incorporated in this gage is not replaceable by the user. Please
contact the manufacturer.
• Caution: There is a risk of explosion when using an inadequate battery.
• Charge the gage only with the supplied charging station.
Ensure that your measuring instrument is accompanied by these instructions when
you give it to others to use.
Dispose of the battery and measuring instrument in accordance with environmental
regulations. Do not incinerate the batteries.
Do not use an electric marking tool on the caliper gage.
This measuring instrument conforms to the Low Voltage Directive 2014/35/EU of
26.02.214 and the Directive 2014/30/EU of 26.02.2014 which concerns
electromagnetic compatibility.
This measuring instrument conforms to the Directive RoHS 2011/65/EU of
08.06.2011
30