Electric Handle Heating; Starting / Stopping The Engine - Stihl MS 261 Manual De Instrucciones

English
In the event of engine running problems,
first check that conditions for use of the
cover plate still apply.
Fitting the cover plate
Place the cover plate (1) in position,
N
engage the two tabs (arrows), and
secure it with the screws (2).
34

Electric Handle Heating

Switching on the handle heating
(depending on model)
Move the switch to F – move switch
N
back to 0 to switch off.
There is no risk of overheating during
long periods of operation. The heating
system is maintenance-free.
Starting / Stopping the
Engine
Positions of Master Control lever
STOP
0
Stop 0 – engine off – the ignition is
switched off.
Normal run position F – engine runs or
can fire.
Starting throttle n – this position is
used to start a warm engine. The Master
Control lever moves to the normal run
position as soon as the throttle trigger is
squeezed.
Choke shutter closed l – this
position is used to start a cold engine.
MS 261, MS 261 C