Num'axes PIE1025 Manual De Instrucciones página 24

When you are finished changing the settings of one or more parameters, press the MENU
button again to exit the TEST mode and save all of the settings you changed.
NOTE: If you do not press the MENU button when you have finished changing the settings of
one or more parameters, the camera will not save your settings.
After setting the parameters to your preferences, be sure to move the switch to ON to begin
actually taking photos or videos. No images will be captured if the switch is left in the TEST
position (unless you press the OK key after exiting the menu).
7.3.1.2. Examples - Changing the settings of some common parameters
To change any parameter's setting, always start with the power switch in the TEST position.
After the LCD screen comes on, press the MENU key. First, you will see "Select language",
"Camera settings" and "Wireless setting" on the LCD screen and "Select language" is
highlighted.
 Press OK to enter the "Choisir la langue/Select language" interface, then press  or  to
select the language you want to use. Press OK to save the setting and exit.
Choisir la langue
Réglages de l'appareil
Réglage sans fil
 Press  to highlight "Camera settings" and press OK to enter. The first parameter you will
see is "Mode". To change it from its default setting of "Camera" (still photos) to "Video"
(shoot video clips), press the  key to select "Video".
Mode
Camera
Photo resolution
5M
Video resolution
720P
Images in series
1 photo
 Now press the  key to move to another parameter in the Menu. Pressing it four times
will take you to "Video length". Try using the  and  keys to scroll through the range of
settings for the length of each video clip the camera shoots.
Video length
10s
Beep sound
ON
Set clock
Enter
Fixed time
OFF
# PIE1025 – indice B – Août 2018
English
Français
Deutsch
Italiano
Mode
Video
Photo resolution
5M
Video resolution
720P
Images in series
1 photo
Video length
20s
Beep sound
ON
Set clock
Enter
Fixed time
OFF
24/88