5....-05-CDP 603
Battery Mode (not supplied)
•
Open the battery compartment on the rear side.
•
Insert 2 1.5V AA type batteries. Match the polarities correctly (see the inside of
the battery compartment).
•
If the device is not used for a long period of time, remove the batteries to avoid
the „spilling" of battery acid.
•
A battery symbol in the display indicates that the batteries need changing.
Always change the complete set of batteries, do not replace only one battery.
Warning: batteries are not to be disposed of together with domestic wastes.
Dispose of the used batteries at the relevant collection bin or at your dealer's.
Never throw batteries into the fire.
AC Adapter Mode (not supplied)
You can also use the device with an adapter.
1. Insert the AC adapter into a duly installed 230V/50Hz protective contact outlet.
2. Connect the CD player to the AC adapter by connecting the jack of the adapter
into the 4.5V/DC socket.
3. When using an adapter (4.5V DC/500 mA) match the polarities correctly as
indicated on the CD player.
4,5 V socket:
LINE-OUT:
PHONES:
VOLUME:
OPEN:
HOLD:
CHARGE ON/OFF:
BBS (BASS BOOST): increases the bass sound. Press repeatedly to switch bet-
13.04.2004
10:36 Uhr
Commissioning the device
General Operating
for connecting a mains adapter.
for connection to a stereo system, for example.
for connecting head- or earphones.
is used to set the volume of the music.
For opening the CD compartment.
it blocks the functions of all the device's keys to protect
against their accidental activation. If the switch is pushed to
the right, the word „HOLD" appears in the display.
This switch is located on the bottom of the device. The
charging function is activated when connected to an exter-
nal mains line (ON).
Make sure that there are no batteries in the battery com-
partment. Danger of explosion! Use only appropriate rechar-
geable batteries!
Note: In order to create the contact to the battery, please
use the charging socket supplied.
ween BOOST 1 and BOOST 2
Seite 31
31
GB