Truper LAGAS-4000 Manual De Instrucciones página 26

High Pressure Gun Operation
• To open the water flow keep the high-pressure trigger (A)
depressed.
• To stop the water flow release the trigger.
• To prevent accidentally starting the machine separate
the trigger lock until is blocked in the slot (B). To release
the lock turn it to its original position.
Nozzle Selection
• Depending on the job to carry out, the gas pressure washer carries different nozzles for different flow openings:
Nozzle
Red
Yellow
Green
White
Black
Spray Nozzle Assembly
CAUTION • Before assembling or removing a
nozzle in the metal rod, turn off the Pressure Washer,
close the water supply, press the trigger to release the
pressure and lift the gun trigger lock. Failure to comply
with one of these points exposes the operator to severe
injury.
CAUTION • When assembling and removing
nozzles prevent from pointing the metal rod towards your
face. The nozzles fast connection system could
accidentally throw it and injure the operator.
• To assemble the nozzles push the fast connection ring (J).
• Set the nozzle in the metal rod.
• Pull the fast connection ring to secure the nozzle in
place (K).
• To disassemble the nozzle, push the fast connection ring
and pull the nozzle to release it.
10
ENGLISH
Flow Abrasion
Cement, Brick, Masonry
0°
15°
25°
40°
soap
Start Up
A
Exteriors, Hedges,
Patios, Terraces
Recommended Nozzle Use with Caution
J
K
B
Boats, RV's,
Gardening Gear