Publicidad
1. PLEASE WASH THE VESSEL PRIOR TO THE USE FOR THE FIRST TIME.
2. UNCOVER THE WATER TANK LID AND FILL THE WATER TANK WITH
ADEQUATE CLEAN WATER.
3. PULL THE FILTER CUP ON THE HOLDER, OPEN AND ADD SUFFICIENT
COFFEE POWDER OR TEA INTO IT.
4. CLOSE THE FILTER CUP ON THE HOLDER THEN PUT THE GLASS ON
THE HOT PLATE.
5. TURN ON THE POWER SWITCH.THE INDICATOR LIGHT WILL COME
ON AND THEN THE COFFEE MAKER STARTS TO OPERATE.
6. TO KEEP THE TEMPERATURE OF THE COFFEE OR TEA IN THE COFFEE
MAKER, LEAVE THE COFFEE MAKER ON THE HOT PLATE.
WATER
TANK LID
WATER
TANK
POWER
SWITCH
NOTE:
1. SHOULD IT BE NECESSARY TO ADD COFFEE POWDER OR TEA IN THE COURSE
OF USE, PLEASE CUT OFF THE POWER SUPPLY FIRST AND THEN TURN ON
THE POWER SWITCH ONCE AGAIN AFTER FINISHING ADDING .
2. THE POWER SUPPLY MUST BE CUT OFF IN CASE THERE IS NO WATER IN THE
TANK;THE POWER SUPPLY MAY BE CONNECTED INTERMITTENTLY IN A VERY
SHORT PERIOD OF TIME IN CASE OF KEEPING THE COFFEE WARM.
3. PLEASE DO NOT IMMERSE THE COFFEE MAKER IN WATER OR ANY OTHER
LIQUID.
4. ONLY CLEAN AND CLEAR WATER SHOULD BE USED.
5. BECAUSE THE HOT PLATE IS VERY HOT,PLEASE DO NOT TOUCH THE HOT
PLATE INSTANTLY DURING ITS USE OR AFTER TURNING OFF THE POWER
SWITCH.
6. PLEASE RINSE THE FILTER CUP，GLASS AND WATER TANK THOROUGHLY WITH
WARM WATER OR CLEANER AFTER USING THEM FOR SEVERAL TIMES.
7. IN CASE THE POWER CORD OR THE INNER LEAD BE DAMAGED, FOR THE
SAFETY＇S SAKE,THEY MUST BE CHANGED BY THE PROFESSIONAL MAINTENANCE MAN.
P-2
FILTER CUP
GLASS
HOT
PLATE
Publicidad
