Pleasant Hearth OFG419T Manual Del Usuario página 12

ASSEMBLY INSTRUCTIONS
7-2. After assembly, the base assembly will look like
figure 7-2.
8. Table Installation
8-1. Lay assembled table upside down on floor. Line up
holes in assembled table with corresponding holes in
base assembly. Insert eight M6 X 12 bolts (DD)
through holes. Tighten them.
Hardware Used
DD
Bolt M6 X 12
GG
Wrench
8-2. After assembly, the unit will look like figure 8-2.
7-2
8-1
x 8
x 1
8-2
12
Base assembly
DD