Heat Function; Technical Data - Topcom SMC-3001H Manual De Usuario

TOPCOM SMC-3001H
– "Full" to enjoy a full back rolling massage.
– "Upper" to enjoy only the upper back rolling massage.
– "Lower" to select the lower back rolling massage.
6.4 Width adjustment
During rolling massage, you can change the distance between the massage heads.
With each press on the width button
6.5 Shiatsu massage
The SCM-3001H Shiatsu massage cushion has rotating massage heads which imitates the pressure
and kneading motions of a real Shiatsu massage.
Press the relevant shiatsu massage button
• "Full" to enjoy a full back shiatsu massage.
• "Upper" to enjoy only the upper back shiatsu massage.
• "Lower" to select the lower back shiatsu massage.
6.6 Spot massage (Shiatsu)
• Press the spot massage up
• Hold the up
• Release the button when you have reached the desired massage point.
There is a 15-minute auto shut off on the unit for your safety.
When the massager is switched off, the massage mechanism will always return to its
lowest position.
When selecting the seat vibration together with the back massage, there will be a
slight decrease of the vibration strenght. This adjustment is perfectly normal and
should not be interpreted as a defect.
6.7

Heat function

• Press the heat button to activate a suitable heating function and the corresponding LED light will
illuminate.
• Press the button again to turn the heat function off.
The heat function cannot be turned on if no massage program is selected.
7

Technical data

Dimensions (W/H/D)
Weight
Power supply unit voltage:
– Input:
– Output:
8 Cleaning
• Disconnect the device and allow it to cool down.
• Clean it with a soft cloth or slightly damp sponge.
• Never allow that water or any other liquid enters the device or accessories.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
, the massage heads will move to the next available position.
or down
or down button to move the massage mechanism up or down.
to select either:
button to stop the kneading massage at a certain point.
710 x 165 x 485mm
4.5Kg
100-240 V/AC/50-60 Hz
DC 12V/3A
6TOPCOM SMC-3001H