Operating The Breast Pump - Beurer BY 70 Instrucciones De Uso

7.2 Operating the breast pump

a) Preparation for two-sided pumping:
1. Before using the breast pump, wash your hands and breasts
thoroughly.
2. The breast pump and the 2 small bottles must be connected
to the silicone tube for two-sided pumping.
3. Sit with your upper body lent forwards slightly. You can support
your back better by using a pillow.
4. Place the breast shields with silicone cushion gently on the
breast. Make sure that the nipples are completely enclosed and
there are no air pockets. To ensure proper function, the breast
shields must be drawn firmly onto the breasts.
5. To switch on the breast pump, press the
switching on the breast pump for the first time, the software
will be in dual pump mode "2". During these two minutes, your
breast nipples will be stimulated in order to prepare them for
pumping the breast milk. This mode should always be selected
for two-sided pumping. The breast pump will begin automat-
ically in stimulation mode (
appear on the display. During these two minutes, your breast
nipple will be stimulated in order to prepare it for pumping the
breast milk. Use the
lation intensity.
6. After the two minutes have passed,
the display. To begin pumping the breast milk, press the
button. Use the
that is comfortable for you. Stop using the pump once there is
180 ml of milk in the bottles.
) and a two-minute timer will
/ buttons to set the desired stimu-
/ buttons to select a suction intensity
button. After
will start to flash on
27
1. Switch on
stimulation
mode
2. Intensity
3. Start pumping
4. Intensity