BLUE SKY WBFP28RB Manual Del Usuario página 9

STEP 3
G
F
J
Attach two side connectors [G]
in between the decorative side
G
F
panels [F] near the bottom. Use two
M6 x 60 mm bolts [J] per panel.
C
STEP 4
D
Turn the assembled fire pit upright.
Place the fire bowl [D] into the table
top [E], then place the grate [C] into
E
the bottom of the fire bowl.
STEP 5
A
B
Attach the spark screen loop [A]
to the spark screen [B] using the
pre-assembled nut.
Make sure to tighten all bolts, but do
not overtighten.
Once the fire is lit, place the
assembled spark screen on top of the
fire pit using the spark screen/grate
H
lift [H].
9