ION Wave Rider Max Guia De Inicio Rapido página 6

Using the Phone
Note: You must power on and pair Wave Rider Max with your Bluetooth device before using it
to listen to music or as a speakerphone.
When you have an incoming call, Wave Rider Max's speaker will play a ringtone.
1. To answer the call, press Wave Rider Max's Call Receive button.
Note: If you get an incoming call during music playback, the music will pause until you
end the call.
2. Speak into the microphone and adjust the call volume using the Volume buttons.
3. To end the call, press the Call End button.
4. To reject an incoming call, press and hold the Call Receive button.
Using the Radio
Selecting a Radio Station:
1. Press the FM button.
2. Select a radio station using the </> buttons.
Saving a Preset:
1. Press the FM button to choose FM Radio. The Bluetooth/FM LED will illuminate solid
green.
2. Press and release the </> buttons to select a FM radio station that you want to save as a
preset.
A voice prompt will be heard identifying the selected station.
3. Press and hold the FM button for 3 seconds to enter Preset Creation mode.
4. Press and release the </> buttons to select from one of the 6 preset locations. For each
button press of < or >, the unit will say the active preset number (for example, "two").
Once the desired save location is reached, press and release the FM button to save the
station preset. The Bluetooth/FM LED will show 3 quick green flashes to confirm a
preset is saved and then exit Preset Save mode and return to FM mode.
Selecting a Preset:
To select from the 6 Preset stations, press and release Play/Pause in FM radio mode. The
tuner will jump to the next preset location and say the name of the preset location (for
example, "three"), and resume playing the FM station audio.
Note: When audio tones are playing, the FM signal will be temporarily muted.
6